Blog

ATC Nesting CNC Furniture Making Machine

How to operate the panel furniture cutting machine

The ATC CNC router machine is equipped with a 9.0kw air-cooled spindle, and disc tool change. Usually used in conjunction with labelling machines and automatic loading and unloading platforms.

ATC Nesting CNC Furniture Making MachineATC Nesting CNC Furniture Making MachineCorrect operation steps of panel furniture cutting machine

  1. Turn on the power and release the emergency stop button of the panel furniture cutting machine. In this way, it can be ensured that the panel furniture cutting machine has been prepared for start-up use.
  2. Turn on the computer connected to the cnc router woodworking machinery, enter the established operating system, find the software that controls the device, and double-click to open the CNC cutting machine software on the computer.
  3. Check whether the panel furniture cutting machine system is normal. If there is any error message about the panel furniture cutting machine in the system, you can no longer use it to work, find out the cause of the error and repair it.
  4. Measure whether the size of the work piece will exceed the range of the pneumatic clamp of the CNC feeder, and make adjustments. Once the size of the work piece is too large, it will affect the normal operation of the equipment to a large extent, and may cause damage to the machine more seriously.
  5. Start the pressure device of the panel furniture cnc wood cutting machine, and normal processing can be carried out after the test is no problem.

The above is the operation steps of the panel furniture cutting machine, I hope it will help you.

ATC Nesting CNC Furniture Making Machine

All the CNC routers can be shipped worldwide by sea, by air or by international express logistics via DHL, FEDEX, UPS. You are welcome to get a free quotation by filling up the form with name, email, detailed address, product and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.

9kw High-power Air-cooled Automatic Tool Change Spindle

Automatic tool changer, high speed, low noise, zero maintenance cost and long service life.

> Imported bearings from Germany; bearings with dust cover, more secure;

> Use ISO30 tool holder to realize fast automatic tool change and improve work efficiency;

> Air-cooled motor with high engraving strength and normal operation under low-temperature conditions;

> Using high-quality motor rotor, low vibration and noise, stable operation, high accuracy and long life;

> The grinding process can be used to increase the concentricity of the motor and extend the service life.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *


You've just added this product to the cart: