Specific engraving speed of woodworking engraving machine
Woodworking engraving machine controllers are generally divided into two categories: One type of controller is just for driving. When the woodworking engraving machine is working, the computer is in a waiting state, and all its calculations are completed by the computer. Unable to perform typesetting work. Another type of controller is controlled by a single-board computer or a single-chip computer. This controller is actually a computer, so as long as the woodworking engraving machine starts to work, the computer can immediately perform other typesetting tasks, especially when engraving for a long time. This advantage is particularly obvious.
High-quality screws and guide rails guarantee the accuracy and performance of the engraving machine when it is used for a long time. The screw rod and the guide rail are also an important part of the engraving machine.
This kind of engraving machine is divided into two categories, the other is the engraving machine with high-power engraving head. One type is a large-format cutting machine: the format is generally more than one meter, but the accuracy of this kind of engraving machine is generally poor; the other is a medium-format engraving machine: this kind of stone engraving machine is generally used for fine processing and organic sign production.This is a technology that can replace noble solid-state lasers and radical glass marking methods (25W carbon dioxide lasers can meet most of the requirements for marking on glass) carbon dioxide lasers mark the glass by destroying the surface of the glass, a new The technology makes it possible to use a sealed-off carbon dioxide laser to directly mark a high-quality mark with a clear outline on the glass. Therefore, a certain number of cracks on the glass is allowed, but excessive cracks will lead to unclear marks, potential weakening of the strength of the data, and more serious loosening of the substrate. However, some laser engraving machine companies have found that precise control of the amount of cracks in the data during the marking process can prevent these problems.
The greater the intensity, the engraving intensity: the engraving intensity of the engraving machine refers to the intensity of the laser that hits the surface of the data. For a specific engraving speed. The greater the depth of cutting or engraving. You can use the panel of the engraving machine to adjust the intensity, or use the computer’s print drive sequence to adjust.
Leave a Reply
You must be logged in to post a comment.