Blog

4 Axis CNC Machining Centre Milling Machine

What are the functions of the mold engraving machine?

Mold engraving machine manufacturer, how much is a mold engraving machine, how much is a mold engraving machine, how much is a mold engraving machine, mold engraving machine tutorial process video, is mold engraving machine the same as a machining center, mold engraving machine tutorial process video

Foam Carving MachineUsers who have used the mold engraving machine should know that its function is very powerful. If everyone does not feel its function, then there should be a mistake. However, for many people who have not used it, the function of the mold engraving machine may not be very clear. It is better to take a look at the introduction in the following article.

We can solve some small problems in the engraving process of the mold engraving machine, such as sudden power failure, improper positioning, no setting path, leaving something in the middle, etc., we can solve it through the circuit board of the mold engraving machine, and the mold engraving machine can also be connected with Continue to carve with the function of breakpoint resume carving. This saves time and effort, and can be completed on time, according to quality and quantity.

4 Axis CNC Machining Centre Milling Machine

Four-axis Styrofoam Machining Center

What are the functions of the mold engraving machine?

Breakpoint Continuation

Start engraving from any percentage, die engraver or engrave to a certain percentage end. You can stop engraving at any time, and select the percentage to continue engraving at the next power-on.

virtual machining

According to the set parameters, the actual processing process is displayed virtually. The processing effect can be observed in advance and judgment can be made in advance.

Display the machining path in real time

All processing paths are displayed first before processing, and the current position is displayed in real time during processing. We can observe the actual engraving situation so that we can make a correct judgment.

Automatically shut down the spindle

Automatically shut down the spindle after completing a function. For some larger circuit boards, if you need to leave halfway, you can choose to automatically turn off the spindle motor after completion.

Automatic origin positioning

It can automatically return to the set zero point from any position. After installing the copper clad plate and adjusting the position of the engraving knife, set the zero point, and no matter what operation is performed in the future, it can always be easily returned to the processing position.

Select any area to engrave. If the engraving in some areas of the circuit board is not in place due to the unequal surface of the board, you can use this function to re-engrave a certain area.

Select two engraving knives to automatically assign engraving areas. Without compromising engraving accuracy, choose a large engraving knife and quickly mill away large blank areas.

Drill the positioning holes in advance, and use the positioning pins when reinstalling, which not only ensures the accuracy, but also facilitates the installation. After the circuit board is removed, it is difficult to reinstall it in place with the naked eye. After using the positioning pin, the reinstallation will be much more convenient. Use with the automatic origin positioning function, the effect is better.

These contents are the sharing of the functions of the mold engraving machine. I hope that if you have any questions in the process of using it later, it is best to ask the professionals first.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *