Blog

PVC Automatic Edge Banding Machine

Full Automatic Edge Banding Machine – IGOLDENCNC

What is the Full Automatic Edge Banding Machine?

The Full Automatic Edge Banding Machine is suitable for linear edge banding and edge banding materials of solid wood board, fiberboard, particle board and other plate workpieces.

Advantage of the Edge Banding Machine

Adopt to the linear sealing of PVC,wood plank and veneer etc.

  1. Using imported quality engines and electric components
  2. Serialized products,a wide range of selection by customers
  3. High precision and efficiency

Full Automatic Edge Banding Machine

Features of Automatic Edge Banding Machine

1:Flexible, advantages of high performance, easy debugging, convenient in maintenance and  easy to operate.

2: high quality electric components and transmitting component make machines fuction more steady.

3: Full-close safety shield,more human operation.

4.energy-saving,enduring.

5.Stable performance.

Details

Corner trim: The contour is trimmed, and the chamfering effect is repaired, and the edge banding effect is more round and smooth.

Scraping: It is used to eliminate the ripple marks (cut marks left by the trimming knife and the finishing fillet) caused by the non-linear motion cutting process of the trimming.

Rough trim:The rough trimming knife is a flat knife, which is used to trim the excess edge banding material on the upper and lower parts of the processed sheet edge band, so that the upper and lower parts of the trimmed sheet are smooth and smooth.

Fine trim:The finishing knife is an oblique repair, used to repair the excess edge banding material after rough repair on the upper and lower parts of the processed sheet edge band, and at the same time, make the natural transition between the sheet material and the edge band in an arc shape.

Buffing: Use a cotton polishing wheel to clean the polished plate to remove excess glue and make it smoother.

Full Automatic Edge Banding MachineFull Automatic Edge Banding Machine

Scope of application

This machine is suitable for linear edge banding and edge banding materials of solid wood board, fiberboard, particle board and other plate workpieces.

Available solid wood strips, pvc, melamine, veneer strips, etc.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *


https://igolden-cnc.com/wp-admin