Panel furniture

Panel furniture custom production line with best price

Panel furniture custom production line manufacturers

These small panel furniture machines are loved by these woodworkers.

The production of whole-house custom furniture is increasingly emerging in the decoration industry. The customized cabinet wardrobe is several hundred yuan higher than a standard set of cabinet wardrobes on the market, and the customized furniture is more favored by customers. Tailor-made cabinets and wardrobes can not only make full use of every space in the house, but also design their own satisfactory cabinets and wardrobes according to the actual situation and actual needs of customers, so as to truly realize the personalized needs of customers. in the decoration industry.

Panel furniturePrecision Panel Saw

Precision panel saws, commonly known as push table saws, belong to traditional woodworking machinery and equipment, and are considered to be the veteran level of customized panel furniture equipment. Many small manufacturers are still using this device.

Advantages of precision saws: The price is cheap, generally between 10,000 and 20,000 yuan, and many people can invest.

Disadvantages of precision saws: The machine is complicated to operate and requires a dedicated carpenter to optimize the layout of the boards. The utilization rate of the board is generally between 60% and 80%. It has to be operated by two people. The processing efficiency is low, and special-shaped processing cannot be processed. The accuracy is far from meeting the needs of the current market, and the risk factor of the machine is relatively large, which has been gradually eliminated by the market.

Electronic reciprocating saw

There are high-end and low-end electronic reciprocating saws. The high-end can open several boards at a time, and the low-end can open up to 2 boards at a time. This type of equipment is used in very high-volume factories.

The advantages of electronic reciprocating saw: mass production, high efficiency. Prices range from more than 60,000 to 200,000.

Disadvantages of electronic reciprocating saws: only straight boards can be cut, and special shapes cannot be processed. It is mostly used for batch processing of simple cabinets and wardrobes such as computer desks.

CNC cutting machine

CNC cutting machine is a kind of fully automatic CNC panel drilling processing equipment based on fool-like operation that has only appeared in recent years. Equipped with professional cabinet and wardrobe design and production software, it can realize three-dimensional online cabinet design and automatic disassembly and assembly optimization. Typesetting, cost budget and other functions

Cabinet production line

Advantages of the cutting machine: The machine is equipped with customized furniture design software, which is easy to operate, fast, high precision and fully functional. Labor and material costs can be greatly reduced. It is the necessary equipment for custom furniture at present.

Disadvantages of the cutting machine: the initial investment is large, and the price generally ranges from more than 100,000 to more than 200,000. The market is relatively chaotic, and it is easy to be deceived by small manufacturers or irresponsible manufacturers when purchasing.

Panel furniture factory is also an ideal investment industry for many people. At the same time, the level of competition is also relatively high. Facing the double pressure of custom furniture industry and traditional woodworking machinery factory. So, it takes a lot of work to win a place in the custom furniture production industry. Huge financial support and courage. How to choose mechanical equipment, each manufacturer needs to decide which equipment to buy according to their actual situation.

Panel furniture production process

For the convenience of operation, the production of panel furniture is usually divided into two lines, A and B. Line A is MDF sticker or white oil. The workpiece route of the coating line is as follows:

A: Material cutting – platen (nail) – edge clearing (slotting) – gong machine – ash – sticker – primer – dry sand – topcoat – installation

B: The processing route of the processing board (veneer) is as follows: cutting – pressing plate – edge cleaning (opening – gong machine – edge sealing – trimming – installation, because the process of line B is simple, usually the cutting time of line B is higher than that of line A The material time of the wire is delayed by 3-4 days, so that the two wire package can be packed.

At present, the development of the custom furniture production line industry has a history of more than ten years, and the development momentum is getting better and better, but there is still a certain gap compared with foreign development technology, especially the technical problems cannot be solved. neglect. Some custom furniture production line products currently have a certain aging problem, and this phenomenon is becoming more and more prominent. This phenomenon has a certain impact on the operator, and will have a certain impact on the operator’s health. my country’s custom furniture production line industry must find a certain solution. method.

Share this post

Leave a Reply

You've just added this product to the cart: