Blog

At present, the CNC cutting machine is playing an increasingly important role in the panel furniture production line. It can quickly and efficiently cut a variety of panels, blanking and punching. It combines the advantages of traditional woodworking machinery and equipment. So, how should we maintain the parts of the CNC cutting machine?

Maintenance of vacuum pump

1. The vacuum pump should be filled with water before working every day, and the water volume should be kept at more than half.
2. The connecting part between the vacuum pump and the engraving machine is called a filter. The filter screen should be cleaned regularly, which will increase the flow and vacuum of the vacuum pump.
3. The water in the tank should be changed regularly, about once a month. Open the valve at the bottom of the tank, water will flow out to clean the water, remove the sediment at the bottom, and then add new water for use.

Maintenance details of each part of CNC cutting machine_Double station four process CNC cutting machine

Spindle maintenance

1. When changing the tool, please remove the dust on the tool holder. If there is too much dust in the tool holder, the tool cannot be clamped and the tool will fall off.
2. When installing the knife, lightly screw the nut to the bottom of the nut, then tighten it with a wrench. If there is a blockage during tightening, withdraw immediately and check for foreign objects in the threads. If the threads of the nut are damaged, replace it immediately. Forcibly tightening is strictly prohibited.
3. The spindle fan should not be covered by objects to prevent foreign objects from falling into the fan.

Electric box cleaning

Regularly clean the inverter and the drive power box in the distribution box to prevent the original parts from heating due to excessive dust. When blowing dust, the air blown by the gun should not contain moisture, which will cause a short circuit.

Oil-water separator

Check whether the water in the oil-water separator and the glass on the air compressor is full every day, and discharge it in time when it is full.

Pay attention to the preheating of row drilling in winter

When the row has been stopped for a period of time and the temperature has dropped to ambient temperature, preheat the row before processing. When starting the drill row for the first time every day, let it warm up slowly under no-load condition, which will allow the bearing to gradually reach its operating temperature, balance the expansion of the bearing race, and obtain the proper preload.

Maintenance details of each part of CNC cutting machine_Double station four process CNC cutting machine

Recommended equipment: double-station four-process CNC woodworking cutting machine

In recent years, with the development of the woodworking industry, the CNC cutting machine has been continuously improved to meet the requirements of different processing. In order to improve production efficiency, different styles of CNC cutting machines have also emerged. The dual-station four-process CNC cutting machine is also a kind of CNC cutting machine, which is an extension of the CNC cutting machine. The double-station four-process CNC cutting machine has two processing platforms. When the material is opened on the A platform, the loading preparation can be carried out on the B platform. After the A platform is opened, the gantry will quickly switch to the B platform for processing. At this time, customers can unload, clean, and load on platform A. On the contrary, platform B will quickly switch to platform A after processing.

What are the advantages of double-station four-process CNC cutting machine?

1. Since the dual-station four-process CNC cutting machine adopts dual-table, when processing products in one station, the other station can also process multiple products at the same time, such as labeling and classification;
2. After processing, the countertop can be cleaned in time to save time;
3. It can feed the unused countertops in time to improve processing efficiency and avoid wasting time;
4. The double-station four-process CNC cutting machine has a simple structure. Compared with the automatic loading and unloading machine, it has no complicated loading and unloading structure, low failure rate, simple operation and easy operation.
5. Compared with the automatic loading and unloading machine, the machine has lower cost and takes up less space. It is easy to connect with custom furniture design and dismantling software, and has excellent compatibility.

In general, the processing efficiency of the dual-station four-process CNC cutting machine is at least 30% higher than that of the ordinary CNC cutting machine. If you have a large business volume and have requirements for processing efficiency, the dual-station four-process CNC cutting machine is your choice!