PVC Automatic Edge Banding Machine
What is the PVC Automatic Edge Banding Machine?
The PVC Automatic Edge Banding Machine is a highly automated machine that replaces the manual edge banding procedures (loose, pre-milling, glueing, cutting, flushing, rough trimming, fine trimming, scraping, polishing, grooving, profiling tracking) machine. The edge banding process is a very important process in the manufacturing process of panel furniture.
This machine is suitable for straight edge banding of solid wood board, fiberboard, particle board and other plate workpieces. The edge banding materials can be solid wood skin, melamine, PVC, veneer, etc. The machine adopts high-quality motors, imported electrical components, serialized products, diversified customer choices, and features high accuracy and high efficiency.
Function introduction of PVC Edge Banding Machine
- Pre-milling: use double milling cutters to modify the corrugation marks, burrs or non-vertical phenomena caused by the panel saw \ cutting saw, to achieve better edge sealing effect. It makes the edge strip and the plate fit more closely, and the integrity and aesthetics are better.
- Adhesive edge banding: With special structure, the two-sided edge banding plate and edge banding material are evenly glued to ensure more firm adhesion.
- Head-to-head: through precise linear guide rail movement, adopting automatic form tracking and high-speed high-speed motor cutting structure to ensure the cut surface is smooth and smooth.
- Precision trimming: Both adopt automatic form tracking and high-frequency high-speed motor structure to ensure the smoothness of the trimmed upper and lower parts of the plate. It is used to repair and process the excess edge banding material of the upper and lower edges of the plate. The finishing knife is an R-shaped knife. It is mainly used for PVC and acrylic edge banding of panel furniture, preferably 0.8mm thick or more.
- Scraping: It is used to eliminate the ripple marks caused by the cutting process of the non-linear movement of the trimming, so that the upper and lower parts of the plate are smoother and cleaner.
- Polishing: Clean the processed plate with cotton polishing wheel, and make the edge end surface smoother by polishing.
- Slotting: It is used for the direct slotting of wardrobe side panels and bottom plates, which reduces the process of panel sawing.
Features of Automatic Edge Banding Machine
- Pre-milling equipment with double trimming blades works on the waved effect that is caused by precise sliding table saw.
- The gluing mechanism adopts a special structure to gelatinize the plates and costing materials unifiormly, ensure a more solid conglutination.
- End trimming mechanism through a precise guide track movement, adopt automatic tracking and high frequency motor fast cutting structure to ensure the cutting surface smoothly.
- Rough/Fine trimming mechanism used for repairing the excess edge materials, adopt automatic tracking and high frequency motor fast cutting structure to ensure the trimming plates smoothly.
- Corner trimming unit is to make the board ending more smooth and aesthetic.
- Scraping unit for a perfect finishing of the applied edge.
- The buffing device adopts the board processed by cotton polishing wheel, by end polishing to make a more smooth surface.
Application of this pvc CNC edge banding machine
Edge banding machine is used to cover wood, plywood, particle board or MDF, any materials need edge banding.
It is suitable for straight edge sealing of solid wood board, fiberboard, particleboard and other sheet metal parts. The edge sealing material can be made of solid wood strip, PVC, melamine, thin veneer, etc.
Leave a Reply
You must be logged in to post a comment.