Blog

Three-process CNC engraving machine is mainly used for processing home doors, composite doors, cabinet doors, bedside tables, classical furniture and various panel furniture. The three spindles can work automatically one after the other, so the multi-tasking three-process CNC engraving machine can do three different jobs on one board without the need for manual tool changes. The three-process CNC engraving machine adopts a heavy-duty machine tool structure and is welded by 8mm thick steel square tubes, with small deformation, good rigidity and high strength. The dust collection system collects dust in time when the three-process CNC engraving machine is working.

When we use the three-process CNC engraving machine, we still have to do a good job of preparation before use, which can also avoid the influence of the machine’s failure during use, resulting in the normal operation of the machine. Then at this time, an inspection before the operation of the three-process CNC engraving machine is particularly important and necessary.

1. The operator needs to be very familiar with the three-process CNC engraving machine. Whether it is the structure and application scope of the engraving machine, or the technical specifications of the cutting machine and the safety rules that must be followed during use, they must have a certain grasp. In order to be able to use it better and avoid accidents. Therefore, there are certain requirements for the basic knowledge of operators, and relevant safety training should also be carried out on a regular basis.

2. Before the official start of work, it is necessary to conduct a complete inspection of the three-process CNC engraving machine. It is necessary to check whether the link bolts of each part of the engraving machine are loose, check whether the transmission device of the engraving machine is running smoothly, and check the various parts of the engraving machine. Check whether the button is normal, and check whether the lubrication system, pneumatic system and various safety systems of the cutting machine are in good condition. These are all things that need to be paid attention to, and then after checking, there is no problem before normal startup and operation.

 

3. Before the formal processing, the three-process CNC engraving machine should be run dry first, because only dry running can ensure that all parts of the machine are very normal and ensure safety.

 

When the three-process CNC engraving machine is running, the operator must pay attention to his own personal safety, and must strictly abide by the safety requirements to avoid accidents.