Which brand of mold engraving machine is good?Thorpe
It is rare for the engraving machine to freeze, but there are some cases. This situation is usually caused by the error of the machine operator of the engraving machine or the usual lack of maintenance of the machine tool. It is useless to panic when the engraving machine suddenly crashes. The main thing is to deal with it in time to avoid greater losses.
After debugging the processing program of the engraving machine, it can enter the automatic processing stage. When the engraving machine enters the automatic processing process, the operator should monitor the cutting process of the engraving machine to prevent product quality concerns and other disturbances caused by abnormal cutting. Manufacturers doing processing here can write this article into the company’s track system and must strictly implement it. The engraving machine suddenly gets stuck during operation, and it rarely happens that it cannot rotate. The common cause of this is relatively stressful shocks, namely collisions. Under the huge impact, the spindle moves violently, which will jam the rotating bearing of the chuck, making the spindle unable to move, and even scratching the spindle. It can be short and long, but it can also be horribly messy. Don’t panic, short and long and tense, keep silent.
At present, there is no need to worry about the jamming of the spindle chuck of the engraving machine manufacturer, let alone dismantling the machine tool yourself. You need to contact the professional maintenance personnel of the engraving machine manufacturer to go to the factory for maintenance, or return it to the engraving machine manufacturer for complete machine maintenance. . If you are really busy at this time and want to disassemble the machine, the manufacturer of the engraving machine has reasons not to give you a warranty. At this time, if the operator can check the damage of the spindle by himself. If the spindle is not damaged, there is no need to leave marks on the spindle. At this time, it can be disassembled and installed in the precise location. If the spindle has deep scratches, be sure to replace it. This spindle has been scrapped!
Operators should carefully operate the engraving machine in daily operations, and protect and maintain the engraving machine to avoid jamming. Do not move the parts of the machine frequently, especially the work light, which can be rotated, but the internal circuit is more complicated, and frequent movement may cause burn-in, short circuit, not to mention hitting the machine. The engraving machine is a precision CNC machining equipment, any large touch may affect the parts and accuracy of the machine tool!
The mold engraving machine is a high-efficiency and high-precision CNC engraving machine, which is used for the processing and production of small molds in the mold industry and advertising products in the advertising industry. The high-precision small CNC engraving machine designed and produced by Jiabang CNC adopts high-strength mechanical structure, which is very suitable for the mold industry. Imported linear guides are used to ensure accuracy and provide a set of competitive configurations.
Which brand of mold engraving machine is good
- Adopt imported linear square guide rail, double-row and four-row ball sliding block, large bearing capacity, stable operation and high precision. The imported ball screw has high precision and the lower knife is accurate.
- The USB interface DSP operating system that is completely separated from the computer and can be remotely operated, the operation is simpler, the design is more user-friendly, and the unique intelligent budget rule is adopted to give full play to the potential of the motor, realize high-speed processing, curve and line synchronization, and more perfect curves. It does not occupy the computer memory and can realize the automatic start and stop of the cutting spindle.
- Good software compatibility, compatible with various CAD/CAM design and production software such as Type3/Artcam/Castmate/Wentai.
- Equipped with engraving tools and two-way tool cooling system, which can effectively improve the service life of the tools.
- PC control system realizes three-dimensional dynamic analog display C digital control, with breakpoint memory function, and continues to work in the event of an accident (broken knife) or the next day.
- The work light is installed on the machine head to facilitate the operation of the knife setting at night, to see the effect, and to highlight the humanized design.
- Dust-proof design, the oil filling circuit is convenient for daily maintenance and increases the service life of the machine.
Leave a Reply
You must be logged in to post a comment.