Computer engraving machine for SalesThorpe
The working principle of the computer engraving machine is to design and layout through the special engraving software configured by the computer. The information of design and typesetting is automatically transmitted by the computer to the controller of the engraving machine, and then the controller converts the information into a signal (pulse train) with power. , so as to control the engraving machine host to generate X, Y, Z three-axis engraving tool path. At the same time, a high-speed rotating engraving head is installed on the engraving machine. Various plane and three-dimensional relief graphics and texts designed by the computer can be engraved automatically by cutting the processing material fixed on the host table by the cutter configured according to the processing material.
As far as the processing principle is concerned, engraving is a combination of drilling and milling, and various data input methods of the engraving machine can be freely moved as needed. Computer engraving machine is divided into laser engraving machine and mechanical engraving machine, both of which have high power and low power. Due to the wide range of applications of engraving machines, it is necessary to understand the applicable scope of various engraving machines. Small is only suitable for two-color boards, architectural models, small signs, three-dimensional handicrafts, etc. Because the power is too small, it greatly affects its application range. A high-power engraving machine can be used as a low-power engraving machine. Suitable for large cutting, embossing, engraving.
Computer engraving machine is divided into laser engraving machine and mechanical engraving machine, both of which have high power and low power. Due to the wide range of applications of engraving machines, it is necessary to understand the applicable scope of various engraving machines: 1. Badges: low-power laser engraving machines (stamp engraving machines), high-power computer engraving machines; 2. Architectural models: large and small Power computer engraving machine; 3. Metal (mold, seal, etc.) processing: high and low power computer engraving machine (high power each cutting more, saving electricity); 4. High power laser engraving machine (high power); 4. High power machinery Engraving machine; 7. Ceramics, mold embryos, jade, jewelry, pendants, electronic fixtures, manual engraving: high-power computer engraving machine;
Wood engraving machine, tombstone engraving machine, laser engraving machine, advertising machine, jade engraving machine, stone engraving machine, cylinder engraving machine, mold engraving machine, PCB circuit board engraving machine, metal engraving machine, glass engraving machine, mold engraving machine
The main purpose
Advertising, handicrafts, molds, electronics, construction, printing, packaging, woodworking, decoration, tombstones, crystal products and other industries.
Acrylic board, PVC board, Hibiscus board, two-color board, woodworking board, MDF, marble, fireproof board, rubber board, glass, crystal, etc.
Advertising industry, decoration companies, hotels, guesthouses, shopping malls, schools, hospitals, office buildings, entertainment venues, bathing centers, groups, enterprises, management agencies, etc.
Computer engraving machine can be used in furniture, furniture decoration, woodworking decoration, musical instruments, woodworking decoration and other industries. This machine is suitable for plane engraving, solid wood furniture engraving, cutting, etc. It is an upgraded product in the furniture decoration industry.
Application industry of computer engraving machine
Wood products: such as sewing machine countertops, electrical cabinet boards, sports equipment, etc.
Mold industry: It can engrave various molds, wood molds, aviation wood molds, propellers, and automotive foam molds.
Musical instrument industry: It is possible to engrave the three-dimensional surface of musical instruments, cut shapes.
Common maintenance details of computer engraving machine
The continuous running time should not exceed 10 hours a day to ensure the cleaning of the cooling water and the normal operation of the pump. The water spindle motor must not be short of water, and the cooling water should be replaced regularly to prevent the water temperature from being too high. If the working environment temperature is too low in winter, the water in the water tank can be replaced with antifreeze.
After each use of the machine, pay attention to cleaning, be sure to remove the dust on the platform and the transmission system, and refuel the transmission system (X, Y, Z three axes) regularly (weekly). (Note: X, Y, Z three-axis polished rod maintenance oil; screw part with high-speed butter; in winter, such as screw rod, polished rod (square guide rail or round guide rail) parts should be rinsed with gasoline first, and then refuelef