Blog

CO2 Laser Engraver Machines

Foam Laser Cutting Machine and Foam Laser Cutting Equipment

Foam double-sided tape refers to a double-sided tape made of a foam substrate coated with adhesive and then covered with a release paper release film. Widely used in electronics industry, automobile industry, household industry, such as mobile phone, computer, membrane switch, car trim, spare parts, etc. Common foam double-sided adhesive materials include EVA foam, PE foam, PU foam, acrylic foam and high-fat foam. There are many kinds and are used in various occasions. Today, the editor will talk to you about the cutting process of foam double-sided tape in the application process.

Traditional foam double-sided adhesive cutting techniques include manual cutting, stamping, knife cutting, etc. In recent years, with the development of laser technology, laser cutting machines have been gradually applied to cutting foam double-sided tapes, and have formed significant technical advantages. Foam laser cutting machine, also known as self-adhesive laser cutting machine, mainly uses high-energy laser beam to irradiate the surface of double-sided tape to form a high temperature area, vaporizes the double-sided tape to form a cutting effect, and precise energy control makes the cutting edge smooth and flat, without burrs, Sticky edge, yellow edge, beautiful edge effect. Just import the required graphics and patterns into the computer and run the equipment controlled by the software to quickly cut complex patterns with high cutting efficiency and high precision. In addition, the foam double-sided tape laser cutting machine cuts through non-contact, the product has no mechanical stress and deformation, and is much better than the traditional process in terms of precision, efficiency and process aesthetics.

CO2 Laser Engraver MachinesCO2 Laser Engraver MachinesRecommended Model: Foam Laser Cutting Machine

 

Foam laser cutting machine features:

  1. Equipped with high-quality laser, stable light source and long service life.
  2. Various sizes and specifications such as 900*600mm, 600*500mm, 1600*1000mm, etc. Can be purchased on demand.
  3. The machine can be used for precise cutting of various non-metallic materials with beautiful craftsmanship.
  4. It can realize cutting, full cutting, half cutting, hollowing out, engraving, etc. Intricate graphics and patterns.

CO2 laser engraver cutting machine

Advantages of foam laser cutting machine:

High precision: positioning accuracy of 0.05 mm, repeat positioning accuracy of 0.02 mm.

Narrow slit: The laser beam is focused into a small spot, so that the focus reaches a high power density, and the material is rapidly heated to the extent of vaporization, and a hole is formed after vaporization. With the relative linear motion of the beam and the material, the holes continuously form slits of narrow width. The width of the slot is generally 0.10 ~ 0.20 mm.

Smooth cutting surface: There is no burr on the cutting surface, and the roughness of the cutting surface is generally controlled within Ra12.5.

CO2 Laser Engraving Cutting Machine

Fast speed: the cutting speed can reach 10m/min, and the maximum positioning speed can reach 70m/min, which is much faster than the wire cutting speed.

Good cutting quality: non-contact cutting, small thermal influence of the cutting edge, basically no thermal deformation of the workpiece, completely avoiding the chipping caused by material punching and shearing, and the cutting seam generally does not require secondary processing.

No damage to the workpiece: The laser cutting head will not touch the surface of the material, so that the workpiece will not be scratched.

Not affected by the shape of the workpiece: flexible laser processing, can process any pattern, cut pipes and other profiles.

Material saving: Using computer programming, products of different shapes can be cut out of the entire board material, maximizing the utilization of materials.

 

All the CNC routers can be shipped worldwide by sea, by air or by international express logistics via DHL, FEDEX, UPS. You are welcome to get a free quotation by filling up the form with name, email, detailed address, product and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.

Share this post

Leave a Reply


You've just added this product to the cart: