Is the CNC plasma cutting machine worth investing?Thorpe
Why do you invest in a CNC plasma cutting machine, not a CNC laser or CNC router?
Each type has its advantages and disadvantages. These are some advantages of CNC plasma cutter:
Low purchase cost
CNC Plasma cutting machine, such as any other CNC machine type, can have a wide range of costs, depending on the features you want. However, in general, their purchase is the least price. The CNC laser cutting machine is the most expensive purchase to date, and the CNC router is in one place in the mid-range.
Low operating cost
The CNC plasma cutting machine wins again. Keep in mind that you must consider the power, gas, consumables, abrasive and routine maintenance of all machines of the CNC plasma cutter. CNC plasma cutting machines often account for $ 15 / hour. The CNC laser is slightly higher than $ 20 / hour. And CNC slices are usually most expensive – $ 30 / hour.
There is no cost comparison without productivity comparison. The CNC plasma cutting machine is really luminous. Typical cutting speed ranges from 60 – 200 IPM. The laser is significantly slower than the maximum thickness because it cuts when circular 20-70 IPM. However, Waterjet is very far, the slowest owner. It cuts the fastest 15 IPM and can fall into one inch fraction per minute.
Edge cutting quality
Here, the CNC plasma cutter will breathe slightly. It is undeniable that CNC Waterjet has indeed gives the square edge, absolutely no dregs or pierces splashes. The CNC laser is near the second time because it can leave some slag and wear thick stainless steel and stainless steel. Plasma tends to give the lowest edge quality. It leaves a slightly tilted angle, causing some dregs and produces more splashes than the laser.
Here, the CNC plasma cutter continues. They produce some thermal distortion (you can decrease in underwater), with +/-.020 “, typical KERF width is .150”. The laser is the second most accurate, typical partial size is +/- .005 “, and kerf is in .025. Waterjet is again the most accurate because the cutting quality is still around +/- .005 “and kerf width .035”.
Plasma machines are now widely used in various industries, IGOLDENCNC as a professional CNC manufacturer, we will recommend our hot-selling plasma cutters.
NO.1 Multifunction CNC Plasma Cutting Machine for Metal Plate Cutting
CNC plasma cutting machine is automatic cutting equipment, suitable for cutting and perforating various carbon steel, stainless steel, iron, aluminium, white steel and other non-ferrous metal plates. Standard equipped with two modes of plasma cutting and flame cutting, integrated structure, bilateral drive, fast cutting speed, low inertia and stable operation.
NO.2 Portable CNC Plasma Cutter for Sheet Metal Manufacturing
The portable CNC plasma cutter for sale machine has a compact and microstructure. The horizontal and vertical rails of the whole machine are made of hard aluminium alloy, which reduces the weight of the equipment, so as to achieve the characteristics of easy movement, compact and flexible operation. It is an ideal upgrade product to replace handheld flame-cutting equipment, handheld plasma cutting devices, profiling cutting machines and semi-automatic cutting carts.
NO.3 Square Tube CNC Cutting Machine with Plasma and Flame
Intersecting square tube CNC cutting machine is an automatic metal tube cutting equipment, suitable for cutting and perforating various carbon steel, stainless steel, iron and other non-ferrous metal tubes. Standard equipped with two modes of plasma cutting and flame cutting, integrated structure, bilateral drive, fast cutting speed, low inertia and stable operation.
Does the CNC plasma cutting machine make sense?
These are the facts about the CNC plasma cutting machine. Just like any CNC machine, they have their pros and cons. Now, you know them and their comparisons, you can make the most intelligence decisions for your business.
Leave a Reply
You must be logged in to post a comment.