Blog

Laser Cleaning Machine

MANUAL AUTOMATED LASER CLEANING MACHINES

Whether you are looking for a laser cleaning solution that is manually loaded, our experts can help you choose the right machine and options. Our machines can remove paint, oxide, rust and other contaminants from metal surfaces. They can also improve surface adhesion with laser texturing

With a high-quality laser source at their heart, you can expect to continuously operate them with minimal maintenance for at least 10 years. Keeping up with time requirements won’t be a problem as our machines are fed by high-power laser cleaning systems of up to 500 watts.

Integrated fume management, guaranteed laser safety, local and remote support, and performance optimization based on your application. Those are some of the reasons why manufacturers choose IGOLDEN.

 

The Manual Cleaning Workstation integrates the powerful LXQ Series fiber laser in an affordable, off-the-shelf workstation. It is the go-to solution when the cycle time makes it possible to manually load and unload parts.

 

With its ergonomic design and Class-1 enclosure, the workstation can be used to clean and texture various small parts. Several options are available to meet your technical requirement s, such as a focal length adjustment for more flexibility, a rotary axis to clean several surfaces, or an upgraded 3D laser head to process curved shapes.

Laser Cleaning Machine

BENEFITS OF THE MANUAL CLEANING WORKSTATIONCost Effective

The manual cleaning workstation is production ready, allowing you to minimize your investment for laser cleaning while benefiting from the high performance of our LXQ Series fiber laser. Your machine parameters are configured and optimized by our laser experts according to your application.

Customized to Your Needs

Choose from a large selection of features such as laser power, user interface, dust management, quality control and automation level to adapt the solution to your requirements. You can always add other peripherals later to meet evolving requirements.

Integrated & Flexible Fume Extraction

Efficiently managing dust and fumes is essential to maintain the repeatability of the laser process and keep the air clean for your employees. The workstation’s exhaust system can be connected to your extraction unit or to a fume filtration system provided by Laserax.

Laser Cleaning Machine

LASER WORKSTATION OPTIONS

Laser Configuration

The workstation is powered by a fiber laser whose power can range from 20W to 100W. Higher power increases the cleaning speed and reduces your operator’s waiting time.

Laser Cleaning Machine

Our basic configuration includes a 2D laser head. However, a 3D laser head can be used to clean and texture with more flexibility. For example, it is used for curved shapes, or when you need to clean several parts during the same laser cleaning sequence without moving the head.

 

Dust & Fume Extraction

Texturing and cleaning generate dust and fumes. For this reason, we offer different models so you can use the extraction power that meets your needs.

Laser Cleaning Machine

Air Knife

Air knives installed on the lens prevent dust from accumulating on the lens by blowing a continuous airstream. Not only does this reduce lens cleaning maintenance, but it also helps you obtain more consistent results.

 

APPLICATIONS of the Laser Cleaning Machine

The manual laser cleaning workstation can be configured to remove rust, oxide, paint and various contaminants from metal surfaces (laser cleaning) as well as to texture surfaces prior to subsequent manufacturing steps (laser texturing).

Share this post

Leave a Reply


You've just added this product to the cart: