Blog

The Ultimate Guide To Router CNC 3D Stone Engraving Machine

3D Stone Engraving Machine

A router cnc 3d stone engraving machine is an electronic device that is used to create designs and shapes in stone. They come in a variety of different sizes and can be used to create a variety of different stone carvings.

 Router CNC 3D Stone Engraving Machine

 

Today I would like to share with everyone the original intention and solution of the stone cnc router often cut off:

  • 1. Whether the raw materials have residues, and whether the strength of the raw materials has become too large. Long-term hand-carving of high-tenacity raw materials, damage to the CNC blade and broken edges are inevitable. Every hand-carving is closely related to the hand-carving rate. Like hand-carved mahogany, if the rate is adjusted too large, the knife will break. surely.
  • 2. The stone cnc router did not disassemble and replace the CNC blade during long-term work, which caused the CNC blade itself to be greatly affected in strength, compressive strength, and sharpness. If the instantaneous speed is not controlled well, then the knife break is of course. Therefore, it is stipulated to check whether the CNC blade is damaged. If the damage is more serious, replace it as soon as possible. Because the damaged CNC blade is not only not good for the actual effect of hand engraving, but also not good for the stone cnc router itself. In order to save so little and greedy the small and lose the big, it will cause more damage.
  • 3. Is the CNC lathe of the stone cnc router suitable for the production and processing of such raw materials? Is the CNC lathe of the stone cnc router placed on a level surface? If it is not leveled, it will cause the tool to break.
  • 4. Is the speed ratio of the servo motor too low? If the speed ratio of the servo motor is too low, the amount of cutting tool per tooth will increase, and the cutting speed will increase, which will cause the tool to break. Generally speaking, people It is better for the applied spindle bearing speed ratio to be higher.
  • 5. Is there dust on the top of the CNC blade and the chuck? The dust in the collet must be cleaned up and clean, otherwise the CNC blades are all very easy to break, and whether the cutting range is too large. Whether the collet and nut are intact. Whether the extension of the CNC blade becomes larger is critical.
  • 6. The program programming of the stone cnc router is incorrect, and the depth of the cutting tool programmed by the program is very large. If the tool durability is set to be too large, it exceeds the bearing capacity of the CNC blade. The CNC blade is too thin, which makes it impossible to cut and breaks the CNC blade.
  • 7. The level decision of the operator of the CNC lathe of the stone cnc router, the personal behavior of the operator of the CNC lathe, the cutting tool, the cutting tool accidentally breaks the CNC blade.
  • 8. The key is related to the strength, compressive strength, sharpness of the CNC blade of the stone cnc router, the length of the extension of the CNC blade, and the smoothness of the rake face of the CNC blade. This requires the customer to select all normal CNC blades for production and processing before production and processing.
  • 9. The raw material being produced is harder than the CNC blade. The selected CNC blade is wrong. If the speed ratio of the CNC lathe of the stone cnc router is too fast, the knife will be broken. For example, there are nails and other metal materials on the countertop of the seaming machine. The CNC blades for marble production and processing cannot be drilled, and the spindle bearing speed ratio for the production and processing of marble is too fast, which will cause the tool to break.
  • 10. No freezing fluid or cutting oil is sprayed. Like the production and processing of marble, or raw materials with a little hard material, a lot of heat must be generated during the whole process of manual engraving. If there is no immediate cooling, the CNC blade will overheat, become loose, and then be more severely damaged, then the resulting knife will not be broken. It’s free.
  • 11. The relevant elements of the surrounding natural environment include whether there is an earthquake source in the surrounding area, and whether the working voltage shown is stable. Whether the relative path of the relevant elements of the automatic control system has been smoothed, and whether the priority selection method is appropriate, it immediately harms the starting rate of the CNC lathe. The higher the starting rate, the more likely it is to cause vibration, which is very easy to cause tooling. Off. The relevant elements of the auxiliary machinery and equipment are whether the milling surface is smooth, whether the secondary drilling is prevented, and the more critical is the problem of cutting.
  • 12. Is the switching power supply shown by the stone cnc router stable? Unsteady switching power supply will also cause the stone cnc router to break.
  • 13. Is the preferred method of stone cnc router normal? It immediately harms the starting rate of the CNC lathe. The higher the starting rate, the more likely it is to cause vibration, and it is very easy to cause the tool to break.

3D Stone Engraving Machine

The Stone CNC Router Machine seamless welded steel structure, rigid Haobu deformation, table back lining plate, the rigid strength, and machine loading capacity can be

 Router CNC 3D Stone Engraving MachineIGOLDENCNC Router CNC 3D Stone Engraving Machine Features:

Functions: This machine is designed for stone countertop edge profiling / chamfering, stone slab engraving, marble carving or cutting, digging, polishing, and grinding the wash basin.
Processing materials: quartz stone, marble stone, granite stone, artificial stone slabs, jade, blue stone, black stone, etc.
Two Spindles can be take into working when required, so no need to stop to change tool/bit;
Edging and engraving function can be switched in one-key operation, which is easy to operate and correspondingly improve processing efficiency.
A small footprint, which can greatly save your space.
Applications: Large murals, background walls, etc. Engraving, embossing, and hollowing stones can also be carried out.

CNC stone carving machine mainly used for marble,granite,blue stone,sand stone, tile, glass,rystal,artificial stone,tombstone,mile stone, jade, etc, also can for the woodworking materials, metal, adveritising materials processing

Share this post

Comment (1)

Leave a Reply