Woodworking engraving machine tutorialThorpe
The CNC system of woodworking engraving machine can generally be divided into two categories: one is that the CNC system only drives. When the woodworking machinery is working, the computer is in the expected state, and all its operations are realized by the computer. Typesetting is not possible. Another CNC system is controlled by a single-board computer or a single-chip computer. This CNC system is actually a computer, so only when the woodworking engraving machine starts to work, the computer can immediately complete the rest of the typesetting work, especially when the engraving time is long, this advantage is particularly significant.
Good screw and guide rails ensure the precision and performance of the engraving machine in temporary use. The screw and guide rail are also the main components of the engraving machine.
The greater the intensity, the higher the engraving intensity: the engraving intensity of the engraving machine refers to the intensity of the laser incident on the surface of the material. About the specific engraving speed. The greater the depth of cutting or engraving. You can adjust the intensity using the engraver panel or using the computer’s print driver sequence. Within 10%, adjust to 1%. The greater the intensity, the greater the corresponding speed. The deeper the cutting depth.
The woodworking engraving machine has been put on the market for production and processing, which has changed the traditional engraving method to a certain extent and reduced the time for manual engraving. They have peculiar drawbacks in engraving beautiful products, high efficiency, finished batch size, consistency, engraving of curved products, and more!
Start to pause: After the processing file is loaded, if the system is idle, press this key, the system will start to run the processing program; if the system is in the processing state, press this key, the system will pause processing.
Stop: Stop the current operation. If the system is in processing state, press this key to stop processing; if the system is in floating tool setting state, press this key to stop floating tool setting.
Breakpoint Continue: If the system is in the processing pause state, press this key, the system will continue processing at the breakpoint.
Continuous: Switch user data input to manual continuous.
Spindle switch: If the spindle is turned off, press this button to turn on the spindle; otherwise, turn off the spindle.
Back to origin: press this key, the system will execute the instruction to return to the origin of the workpiece.
x: Move the tool along the positive x-axis. If it is in the state of continuous jogging, it will continuously jog in the positive direction of the x-axis; otherwise, it will advance in the positive direction of the x-axis according to the current step size. Note: If this key is pressed in the state of continuous jogging, the tool will jog continuously at low speed manually. Press and hold the shift key and the key combination of this key (hold down the shift key and press it, do not release the shift key at this time), the tool will be jogged manually and continuously at high speed.
X-: Move the tool in the negative direction of the x-axis. Movement speed, step size, and key combinations are the same as described for the x key.
y: Move the tool along the positive y-axis. Movement speed, step size, and key combinations are the same as described for the x key.
Y-: Move the tool in the negative direction of the y-axis. Movement speed, step size, and key combinations are the same as described for the x key.
z: Move the tool along the positive z axis. Movement speed, step size, and key combinations are the same as described for the x key.
Z-: Move the tool in the negative direction of the z-axis. Movement speed, step size, and key combinations are the same as described for the x key.
Shift: Pressing this key alone has no effect, only the combination of this key and other keys has the corresponding effect; please refer to the description of other keys for the combination method.
Tool settings: The second key from the left in the fifth row of the dedicated keyboard. Press this key, the system will perform floating tool setting.
F-: Press this key to decrease the feed ratio.
F+: Press this key to increase the feed ratio.