Select The Five Points Of 3d Wood Engraving Machine
3d wood engraving machine suitable used for wood furniture Industry: Wave Plate, fine pattern, antique furniture, wooden door, screen, craft sash, composite gates, cupboard doors, interior doors, sofa legs, headboards and so on.
First, the choice of format size customers should be based on business needs and financial situation, choose your own engraving machine the size of the model and its power. Engraving machine for small-format 600mm × 600mm and 600mm × 900mm feed width of 700mm. The color plates of the sculpture is the basic application of small-format engraving machine to accept the good.And then a small engraving machine price its similar engraving color plates Panel, cumbersome and unnecessary waste. Large format engraving machine 1200mm × 1200mm, 200mm × 1500mm, 1500mm × 2400mm 2400mm × 3000mm, engraving machine of the above models into the Section width in excess of 1350mm, plexiglass and PVC plate size of the market are 1300mm x 2400mm, so that several models of customer demand for large format engraving machine is more suitable.
Second, the spindle motor spindle motor is a key component of computer engraving machine, its performance has a critical influence on the overall performance of the 3d wood router. Machining spindle is usually divided into two categories: precision machining spindle, and power cut off the spindle.
A precision machining spindle is characterized by low noise, high speed, height, suitable for processing, in particular fine workpiece, such as seals, nameplates, badges and other gifts. Such motors are usually for high-speed frequency conversion motor, less power, in 250W following. The drawback is less able to cut thick materials, are not cut thicker materials.
How To Lift The Limit Alarm On The 3d cnc wood carving
Under normal circumstances, the 3d cnc wood carving appears to open the control system to prompt the limit alarm. This is not a mechanical problem, but because the emergency stop button on the control cabinet of the carving machine does not open the trigger limit signal, the control software will prompt the limit alarm. The solution is very simple. We just need to turn the emergency stop button and the fault can be solved immediately.
The second possibility is that the parameters under the engraving machine I/Q state window are disordered. At this time, the parameters need to be modified as follows: Click on the x-axis, press Ctrl + shift + Alt and then right-click, click on the opposite point after the popup window. “. Click on the Y-axis, press Ctrl + shift + Alt and then right-click. After the pop-up window, click “reverse the point”. Click on the Z axis, press Ctrl + shift + Alt and then right-click. After the popup window, click “reverse the point” and then close the control window. After the above operation is completed, reboot the engraving machine control system and it can work properly.