Blog

Machine for cutting wood are regarded as the best furniture manufacturing machines by cabinet makers and furniture manufacturers to set up a furniture production line or realize their custom furniture making projects, plans, and ideas. As a core CNC machine for furniture making,

This is a high-performance CNC wood cutting machine developed . which can greatly improve your work efficiency. As a CNC wood working machine, it can be used to process CNC Plywood, wood etc.

1、Machine body system：It is the mechanical part, adopt 5mm thickness body and 12mm thickness gantry. Processed by vector effects such as tempering and vibration, avoid the deformation of the bed structure caused by long-term operation. Then, drilling and tapping using a large gantry milling machine to ensure high accuracy of mechanical installation. The main function is to provide a support platform for machine processing, and all processing is completed on this platform.

2、Control system： It is used to process the G code created by design software, such as Artcam, issue processing control commands, and direct the to carry out processing actions to complete the processing of products. Generally, the control systems for the include the following: Taiwan LNC control system, Syntec, Nc studio, DSP handle, and Mach3 control system. The Syntec control system has Syntec 6MA, Syntec 6MB models etc. Generally speaking, Syntec 6MA used for commomn cnc router machine, Syntec 6MB use for ATC cnc router machine. Taiwan LNC control system and Syntec control system, they all are the most professional control system.

3、Spindle system：Spindle system is mainly composed of Spindle and Inverter, and the spindle assembly is the executive part of the . Its function is to support and drive the tools to moving and rotate for cutting, bear the loads such as cutting force and driving force, and complete the surface machining movement. The main shaft assembly is composed of the main shaft and its supports, transmission parts and seals installed on the main shaft, and requires good rotation accuracy, structural rigidity, vibration resistance, thermal stability and precision retention. The spindle part of the engraving machine is fixed on the bracket of the Z-axis screw, and the electric spindle is rotated at a high speed to realize the cutting motion of the tool.

4、Transmission system ：It consists of servo drive circuit, servo drive device, Hiwin Square guide rails and Helical Rack. Its function is to receive the feed speed and displacement command signals sent by the control system. After being converted and amplified by the servo drive circuit, the XYZ axis motor is driven by the servo drive device and mechanical transmission mechanism to achieve work feed and rapid movement. The servo feed system of the control system can accurately control the movement speed and position of the execution parts according to the command signal, and the motion trajectory synthesized by the movement of several execution parts according to a certain law.

5、Electrical System： This is the detection part of the driving signal of the . According to the control command sent by the control software, the is directly driven to generate mechanical motion, and various states of the are detected and fed back to the control software for identification and processing.

One of the main advantages of machine for cutting wood is that you can make deep cuts of much more than one inch 1″ inch or 25mm of wood without mistreating or burning the material, and it does not matter if the wood is hard or soft, same can be processed. Regarding engraving, the advantages of a CNC router type machine are even more noticeable; full 3D engravings can be made even in 360°, this is impossible to achieve in other technologies, in addition to the same way does not damage or burn wood or MDF.