Blog

Purchasing a cnc router table wood is an important decision and large investment for a woodshop. CNC machine is the life of the factory. If a machine breaks down, it will waste time and cost, and bring direct losses to the manufacturers. So the routine maintenance of the machines should not be overlooked.

 

The following tips for you to explain in details:

1, CNC wood carving confidential in a dry ventilated place (to prevent exposure)

2,CNC router table woodmust be configured with a reliable regulator to ensure the safety ground ground

3, as the output file to a computer without Internet access CNC wood engraving machine

4, CNC wood engraving machine once every month to maintain (the screw on the amount of oil added)

5, the control box to be placed in a well ventilated place, the work can not be placed in high-temperature zone

6, in a certain period of time to check whether the line CNC wood engraving machine for loose

7, not in the CNC engraving machine head placed on the table or debris (with magnetic materials, super-weight items, liquid)

8, often time do not let the machine CNC wood engraving machine table of the same corner of the work (in case screw, guide rail and the beam did not always time to contact can not reasonably be lubricated)

9, good lubrication, periodic inspection, cleaning screw, add or replace fat oil, the screw, nut and other parts of the movement is always good lubrication to reduce mechanical wear rate. CNC wood engraving machine computer control box maintenance If the computer and control box is too dirty, too much dust will affect the cnc router table wood normal operation.

Control box is dirty, the phenomenon may be a short circuit burned out the drive. Health must be cleaned regularly to maintain various types of card board and ventilated and dry. Maintenance of the spindle motor In order to longer, more stable use of the spindle motor, should note the following:

1, change the water every three days

2. Regular fuel 3, maintaining bearing lubrication

4, can not have water into the motor

5, to keep bearing clean and

6 at high speed, strong resistance to the case of long-term work. CNC wood engraving machine maintenance is the need to adhere to do, but not superficial, clean up, or March in the six months do not CNC wood engraving machine maintenance work

 

 

How do you clean a cnc router table wood?
Clean the cnc router table wood and its surroundings regularly to prevent any malfunctioning issues. House-keeping is extremely important, whilst also making for a better working environment. The best method for cleaning is with a fibre towel and a vacuum. You should also pay close attention to oil drip trays and / or filters, which should also be cleaned regularly.

In view of how to maintain the engraving machine, the above is some related knowledge that I have sorted out for you. While using any machine, we should pay attention to maintenance and repair, which can not only increase work efficiency, but also prolong the service life of the machine.