Blog

With the rapid development of technology, more and more industries and enterprises have begun to use high-end products. There are many high-end products, but in the machinery industry, CNC engraving machines are widely used. The industry is new, but it is a very common tool in real production applications. However, high technology has created these CNC machine tools, which has brought great convenience to our production and improved productivity. Once this high-tech product is destroyed, it will lose a lot, because the production of these high-tech products requires a lot of manpower and material resources. Furthermore, it takes a considerable amount of time to produce these high-tech products. Therefore, we should be extra careful when using these tools, and at the same time avoid the danger to life caused by improper operation.

Operators engaged in CNC engraving machines should be familiar with the use principles of CNC engraving machines, familiar with the use principles of CNC engraving machines, not only the principles, but also the maintenance and maintenance of cutting machines. A major mistake will result in huge losses. When it comes to this kind of maintenance, the CNC engraving machine should be used frequently. Some parts inside will rust and get damaged if not used regularly. Pay attention to mechanical temperature adjustment when using. If the temperature is not well controlled, it will be damaged. damage the life of the machine. Also, the machine should be cleaned when not in use. We all know that machines generate some garbage when they are in use. If not cleaned in time, the machine will rot or even be scrapped.

Some maintenance problems of CNC engraving machine

CNC engraving machine is a whole machine. While each part functions differently, the parts work together. If the parts are not well maintained, the machine will replace with new parts. If it is equal to the rhythm, it will bring a lot of unnecessary trouble to the production, and it will also have a great impact on the machine operator. Because the new parts cannot be used normally, it is an important task for the machine operator to maintain the machine well. . very important thing. Always take good care of the machine.

Troubleshooting and maintenance of CNC engraving machine

Many people ask me how much is a CNC engraving machine? But ignoring the use of machine repair, the following will introduce the solution to the machine failure.

CNC engraving machine spindle automatically rotates or stops

Control card failure; inverter failure

When opening the CNC engraving machine software, the computer prompts “Failed to open the card, check the card”

Check whether the board driver has been installed in the PCI slot or replace the board with a PCI slot; 2. Reinstall the two data cables and check for broken pins. The current CNC engraving machine software prompts: three-axis alarm, initialization error four

Check whether the two data lines of the computer and CNC wood carving CNC iron engraving machine are connected well; 2. Check whether the fuse of the control box adapter board of the CNC engraving machine is blown, and replace the fuse; 3. Check whether the 85V power supply is normal

The CNC engraving machine is wrong or the size is wrong when engraving

Check the correctness of the CNC engraving machine software;

Check the size of the screw gap and whether the fastening screws on the polished rod are loose;

Correctly set software parameters

When the X axis moves for a certain period of time, do not lift the knife, press it up and down

Check whether the Z-axis motor of the CNC engraving machine is running normally, the size of the driving current and its own fault; Check whether the Z-axis is in poor contact or intermittent phenomenon

The spindle motor of CNC engraving machine does not rotate or reverse