Blog

With the rapid economic development, people’s quality of life has also improved, so woodworking machinery products have also been rapidly developed. Woodworking engraving machine is one of the vivid examples. Woodworking engraving machine can be used for carving, hollowing and cutting. It can be applied to wood industry, advertising signs, furniture manufacturing, toy gift manufacturing, decoration industry, PCB manufacturing, etc.

Some customers report that woodworking engraving machines are often damaged by knives.

First is the parameter setting problem. When the woodworking engraving machine is positioned on the Z axis, it is not to let the knife touch the surface of the material, but to remove the material and let the knife directly touch the surface of the table. The axis is reset to zero first, and then the corresponding height is increased according to the cutting depth set, and then the Z axis is returned to zero here. This is the origin of the Z axis. According to the setting depth, the lower point of the engraving machine is the place to zero once, which is just above the table. This ensures that the material is completely engraved without hurting the table of the engraving machine.

Secondly, add a protective board on the table top of the woodworking engraving machine. For example, a woodworking engraving machine with a vacuum adsorption table can put a thin plate on the table. The loose and breathable thin plate itself will not affect the vacuum adsorption capacity, and it also effectively avoids the inaccurate origin setting. The problem that the tool damages the table.

Even if the table top of the woodworking engraving machine is in use, even if the above treatment is done, it will inevitably have accidental scratches in long-term use. At this time, it is necessary to re-mill the table top. When the bakelite or PVC on the countertop is too thin, it can Just rebuild another layer. In addition, it should be noted that when the machine leaves the factory, in order to prevent damage to the table surface due to bumps during logistics transportation, it is generally necessary for Superstar CNCafter-sales personnel to re-mill the table surface during installation and debugging.