Laser Cleaning Machine

Fiber Laser Cleaner Rust Removal Machine For Metal

Fiber laser cleaner rust removal laser cleaning machine is a new generation of surface cleaning high-tech products. It is very easy to install, manipulate and achieve automate.Laser Cleaning Machine

laser cleaning machine enables you to effortlessly get rid of the toughest rust, dust, oxides, oil and other contaminations as well as paint coatings from metal, plastic, ceramics, glass, stone or concrete. The Fiber laser cleaner rust removal laser cleaning machine uses a laser beam at the surface of the material to break down the layer of rust or paint, it is a contactless method that only breaks down the layer without causing any harm to the material itself. The laser beam can be controlled which gives the operator a lot of control over how much of removal needs to be done and with accuracy.

Fiber Laser Cleaner Rust Removal Laser Cleaning Machine

How To Do Daily Maintenance For Fiber Laser Cleaner Rust Removal Machine?

1.Handheld cleaning head (Upgrade Cleaning Head, Continuous Operation without Burning the Lens)
1.1 Daily inspection: Check the protective lens. If there is foreign matter, use a special dust-free cotton swab dipped in industrial alcohol to clean it. If there is coating damage or lens damage, please replace the protective lens in time to avoid other optical lenses being burned.
1.2 Regular inspection: When the machine is used or not used for some time, first check the laser module, and make sure that each optical component is free from dust pollution, mildew, and other abnormal phenomena before turning it on.
1.3 Observing the light spot: The operator can check the laser output light spot with black image paper. Once the spot is found to be uneven or skewed, it should be repaired in time.

2.Water chiller
2.1 The dust on the condenser and the dust filter needs to be cleaned regularly.
2.2 When the machine is transported or not used for a long time, the coolant should be drained.
2.3 When the temperature is lower than 2°C, please check and ensure that the chiller is working properly before using the machine to avoid damaging the laser tube, output head, and water chiller due to the solidification of the coolant.
2.4 The coolant must be replaced in the following cases
2.4.1 The filter element has been replaced.
2.4.2 After 3 months of use.
2.4.3 Use again after long-term non-use

Laser Cleaning MachineAdvantages and Disadvantages of Laser Cleaning Technology
Laser cleaning is environmentally-friendly, consumable-free, and requires no chemical products or solvents as this method only uses a laser beam to vaporize a layer. Additionally, laser cleaning machines pose no risk to the operators as these machines are designed to meet all safety standards.

Fiber Laser Cleaner Rust Removal Laser Cleaning MachineOther major advantages of using laser cleaning technology include high productivity, lack of mechanical damage on the surface, and remotability. Thus, Fiber laser cleaner rust removal laser cleaning machine is the safest method currently available for rust removal. However, the difficulty in discriminating the ablation thresholds between the substrate and the contaminant layer is a major disadvantage of this technology.

Share this post

Comment (1)

Leave a Reply

You've just added this product to the cart: